Denon AVR-X3000 User Manual

115
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Switching input sources
Switch to the desired input source on this unit while viewing sub screens.
1
Press MAIN to switch the zone mode.
MAIN lights.
2
Press InstaPrevue.
The main screen (current input video) and sub screens (other input
video) are displayed.
3
Use uio p to select the desired input source from the
sub screen, and press ENTER.
Setting how to display sub screens
You can select to display five sub screens or only one sub screen.
1
While sub screens are displayed, press OPTION.
The InstaPrevue setting screen is displayed.
2
Press o p in “HDMI Input” to select how to display sub
screens.
All (Default) : Displays five sub screens.
One at time : Displays only one sub screen.
3
Press OPTION to enter the setting.
Changing the display location of sub
screens
You can change the display location of sub screens to a desired location.
1
While sub screens are displayed, press OPTION.
The InstaPrevue setting screen is displayed.
2
Press i to select “Location” and use o p to select the
location where you want to display sub screens.
3
Press OPTION to enter the setting.
%
•The InstaPrevue function is available when HDMI signals are input to the main
screen. However, it is not available while computer’s resolution (e.g. VGA) or 3D
video content is being played back.
•The InstaPrevue function is not available when the power of ZONE2 is on.

Denon AVR-X3000 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	135 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	7
Audio (L/R) in	5
Composite video in	3
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
AM band range	520 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	DTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Cables included	AC

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	10700 g