Denon AVR-X3000

174
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2
Set Defaults : The input source name is returned to the default setting.
%
•Up to 10 characters can be input.
•For character input, see page132.
Quick Select Names
Change the “Quick Select” display title to one you prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
Set Defaults : The input source name is returned to the default setting.
%
•Up to 16 characters can be input.
•For character input, see page132.
Trigger Out
Selects when to activate trigger out.
For details about how to connect the TRIGGER OUT jacks, see “TRIGGER
OUT jack” (vpage43).
n When setting for zone (MAIN ZONE / ZONE2)
Trigger out is activated through linkage to the power of the zone set
to “On”.
n When setting for input source
Activate trigger out when the input source set to “On” is selected.
On : Activate trigger on this mode.
– – – : Do not activate trigger on this mode.