Denon AVR-X3000

116
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
MAIN
ZONE2
SLEEP
Sleep timer function
You can have the power automatically switched to standby once a set
time has elapsed. This is convenient for viewing and listening while going
to sleep.
The sleep timer function can be set for each zone.
Using the sleep timer
1
Press MAIN or ZONE2 to switch the zone mode.
The button for the selected zone is lit.
2
Press SLEEP and display the time you want to set.
•The SLEEP indicator on the display lights.
•You can set the sleep timer in the range from 10 to 120 minutes
in steps of 10 minutes.
2 To cancel the sleep timer
Press SLEEP to set “O”.
The SLEEP indicator on the display turns o.
%
•The sleep timer is also cancelled when this unit is set to the standby mode or the
MAIN ZONE or ZONE2 power is turned o.
NOTE
•The sleep timer function cannot turn o the power of devices connected to this
unit. To turn o the power of those connected devices, set up sleep timers on the
connected devices themselves.