EasyManuals Logo
Home>Denon>Receiver>AVR-X3000

Denon AVR-X3000 User Manual

Denon AVR-X3000
249 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
186
Appendix
SettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Tips
2 No sound comes out
Symptom Cause/Solution Page
No sound comes out of speakers. •Check the connections for all devices.
•Insert connection cables all the way in.
•Check that input connectors and output connectors are not reversely connected.
•Check cables for damage.
•Check that speaker cables are properly connected. Check that cable core wires come in
contact with the metal part on speaker terminals. Also, securely tighten speaker terminals.
Check speaker terminals for looseness.
•Check that a proper input source is selected.
•Adjust the master volume.
•Cancel the mute mode.
•Check the digital input connector setting.
•Check the digital audio output setting on the connected device. On some devices, the digital
audio output is set to o by default.
•No sound is output from the speakers when headphones are connected.
24,31,32,34,
35,36,37,39,
41
24
46, 122
47, 122
47, 123
32,34,35
11
No sound comes out when using the
DVI-D connection.
•When this unit is connected to a device equipped with a DVI-D connector, no sound is output.
Make a separate audio connection.

Table of Contents

Other manuals for Denon AVR-X3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3000 and is the answer not in the manual?

Denon AVR-X3000 Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Output impedance16 Ω
Input sensitivity200 mV
Pre-out connectivityYes
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)102 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)135 W
Power output per channel (20-20KHz@8 Ohm)105 W
HDMI in7
Audio (L/R) in5
Composite video in3
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in2
Connectivity technologyWired
Speakers connectivity typeBanana connector
Audio formats supportedAAC, FLAC, MP3, WAV, WMA
Image formats supportedJPG
Wi-FiNo
RDS featuresPTY, TP
AM band range520 - 1710 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Internet radio services supportedSpotify, vTuner
Supported video modes1080i, 1080p, 480p, 576p, 720p
DisplayVFL
Color depth24 bit
Aspect ratio4:3, 16:9
Product colorBlack
Audio decodersDTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibilityiPhone, iPod
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.1 W
Power consumption (typical)600 W
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth379 mm
Width434 mm
Height167 mm
Weight10700 g

Related product manuals