Denon AVR-X3000 User Manual

124
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Settings
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
2 Audio
Setting items Description Page
Dialog Level Sets the output level to clarify the dialogue output from the center channel.
133
Subwoofer Level This setting adjusts the volume level for the subwoofer.
133
Subwoofer Turn subwoofer output on and o.
133
Subwoofer Level This setting adjusts the volume level for the subwoofer.
133
Surround Parameter Adjusts surround sound parameters.
134
Cinema EQ Gently softens the upper treble range of movie soundtracks to reduce possible harshness and improve clarity.
134
Loudness Management This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic
range of audio recorded in the disc.
134
Dynamic Compression Compress dynamic range (dierence between loud and soft sounds).
134
Low Frequency Eects Adjust the low frequency eects level (LFE).
135
Center Gain Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in
the front.
135
Panorama Assign front L/R signals to also go to the surround channels for wider sound.
135
Dimension Shift sound image center to front or rear to adjust playback balance.
135
Center Width Distributes the dialogue output from the center channel to left and right channels and widens the sound image in the front.
136
Delay Time Adjust the audio delay time against video to extend the sound field image.
136
Eect Level Adjust the sound eect level of the current sound mode.
136
Room Size Determine size of acoustic environment.
136
Height Gain Control the front height channel volume.
136

Denon AVR-X3000 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	135 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	7
Audio (L/R) in	5
Composite video in	3
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
AM band range	520 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	DTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Cables included	AC

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	10700 g