Denon AVR-X3000 User Manual

43
Appendix
TipsSettingsPlayback
Contents
Front panel Display Rear panel IndexRemote
Connections
Connecting an external control device
REMOTE CONTROL jacks
If this unit is installed in a location that is out of range of the signal from
the remote control unit (such as when installed in a cabinet), you can still
operate the unit and the devices connected to it by using a commercially
available IR receiver.
You can also use it to remotely control ZONE2 (another room).
HDMI
IN
AM
LOOP
ANTENNA
COAX.
75Ω
FM
CBL
/
SAT
1 CBL/SAT
2 DVD
Y
P
B
/
CB
DVD
1
2
3
PR
/
CR
DC12V 150mA MAX.
STRAIGHT CABLE
RS-232CTRIGGER OUT
ARC
1 CBL/SAT
2 DVD
3 Blu-ray
6 CD
4 GAME
5 MEDIA PLAYER
ZONE2
MONITOR
ASSIGNABLE
IMPEDANCE : 6～16 Ω CLASS 2 WIRING
SPEAKERS
FRONT
FRONT SURROUND SURROUNDCENTER
SURROUND BACK
SURROUND BACK
3 Blu-ray
4 MEDIA PLAYER
1 CBL
/
SAT
2 DVD 5 CD
ANTENNA
ZONE2
SUBWOOFER2
SUBWOOFER1
PRE OUT
Blu-ray
VIDEO
IN
IN
COMPONENT VIDEO
IN
AUDIO
CBL
/
SAT
AUDIO
TV
CD
DVD
COAXIAL OPTICAL
1
1
2
2
DIGITAL AUDIO
IN
(
ASSIGNABLE
)
(
ASSIGNABLE
)
NETWORK
OUT
HDMI
(
ASSIGNABLE
)
(
ASSIGNABLE
)
(
ASSIGNABLE
)
AC IN
REMOTE CONTROL
IR
IN OUT
AUX
OUT
Device equipped with a
REMOTE CONTROL IN jack
Infrared
retransmitter
Infrared
sensor
Output
Input
TRIGGER OUT jack
When a device with TRIGGER IN jack is connected, the connected device’s
power on/standby can be controlled through linked operation to this unit.
The TRIGGER OUT jack outputs a maximum 12 V DC /150 mA electrical
signal.
HDMI
IN
AM
LOOP
ANTENNA
COAX.
75Ω
FM
CBL
/
SAT
1 CBL/SAT
2 DVD
Y
P
B
/
CB
DVD
1
2
3
PR
/
CR
STRAIGHT CABLE
RS-232C
REMOTE CONTROL
IR
IN OUT
1 CBL/SAT
2 DVD
3 Blu-ray
6 CD
4 GAME
5 MEDIA PLAYER
IMPEDANCE : 6～16 Ω
SPEAKERS
FRONT
FRONT SURROUND SURROUNDCENTER
SURROUND BACK
3 Blu-ray
4 MEDIA PLAYER
1 CBL
/
SAT
2 DVD 5 CD
ANTENNA
ZONE2
SUBWOOFER2
SUBWOOFER1
PRE OUT
Blu-ray
VIDEO
IN
IN
COMPONENT VIDEO
IN
AUDIO
CBL
/
SAT
AUDIO
TV
CD
DVD
COAXIAL OPTICAL
1
1
2
2
DIGITAL AUDIO
IN
(
ASSIGNABLE
)
(
ASSIGNABLE
)
NETWORK
(
ASSIGNABLE
)
(
ASSIGNABLE
)
(
ASSIGNABLE
)
DC12V 150mA MAX.
TRIGGER OUT
12 V DC/150 mA trigger-compatible device
NOTE
•Use a monaural mini-plug cable for connecting the TRIGGER OUT jack. Do not use
a stereo mini-plug cable.
•If the permissible trigger input level for the connected device is larger than 12 V
DC/150 mA, or has shorted, the TRIGGER OUT jack cannot be used. In this case,
turn o the power to the unit, and disconnect it.

Denon AVR-X3000 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	135 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	7
Audio (L/R) in	5
Composite video in	3
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
AM band range	520 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	DTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Cables included	AC

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	10700 g