Denon AVR-X3000 User Manual

130
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Setting items Description Page
Information Show information about receiver settings, input signals, etc.
175
Audio Shows information about audio input signals.
175
Video Shows information about video input signal and HDMI Monitor.
176
ZONE Shows information about each zone.
176
Firmware Displays system information.
176
Notifications Selects notification message preferences.
176
Usage Data Selects whether or not to send anonymous usage data to Denon.
177
Firmware Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications.
177
Update Update the firmware of the receiver.
177
Notifications Displays a notification message on this unit’s menu screen when the latest firmware is released with “Update”.
178
Add New Feature Display new features that can be downloaded to this unit and perform an upgrade.
178
Setup Lock Protect settings from inadvertent changes.
179
2 Setup Assistant
Setting items Description Page
Begin Setup Perform basic installation/connections/settings from the beginning according to the guidance indicated on the TV screen.
C 7
Language Select Perform settings item by item according to the guidance indicated on the TV screen.
Speaker Setup
Speaker Calibration
Network Setup
Input Setup

Denon AVR-X3000 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	135 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	7
Audio (L/R) in	5
Composite video in	3
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
AM band range	520 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	DTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Cables included	AC

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	10700 g