EasyManuals Logo

Denon AVR-X3300W Service Manual

Denon AVR-X3300W
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
The circuit around CY920 is faulty.
YES
Can the NET1.8V... output volt-
age (1.8 V) to U1071 (DC-DC
Conv.) be conrmed?
Can the NET1.8V output volt-
age (1.8 V) to Q1069(FET-SW)
be conrmed?
Can the NET2.5V output volt-
age (2.5 V) to U1072 (DC-DC
Conv.) be conrmed?
Are the versions of the Ethernet SBL and IMG
displayed in Version Check Mode?
Is D5V_POWER (U1018 uCOM
136 pin) "Hi" ?
Is E_POWER3 (U1018 uCOM
134 pin) "Hi" ?
Is E_POWER2 (U1018 uCOM
133 pin) "Hi" ?
The circuit of E_POWER3 be-
tween U1018 and U1071 are
faulty.
The circuit of E_POWER3
between U1018 and Q1069
are faulty.
The circuit of E_POWER2 be-
tween U1018 and U1072 are
faulty.
The circuit around U1071(DC-
DC.Conv.) is faulty.
The circuit around Q1069
(FET-SW) is faulty.
The circuit around U1072(DC-
DC.Conv.) is faulty.
The Ethernet software is faulty.
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
In the same way as for Network connection troubleshooting, check the CY920 power supply and Eth-
ernet SBL, and that the IMG version is displayed correctly.
Is the antenna cable inserted correctly into
CY920?
Is the Bluetooth device compatible with the
A2DP prole?
Is the Bluetooth function enabled on the Blue-
tooth device?
Connect the antenna cable correctly.
Use a device that is A2DP prole compatible.
Enable the Bluetooth function and try connect-
ing again.
5.2. Cannot establish a Bluetooth connection
Checking the unit
Check the Bluetooth device being used
NO
NO
NO
78
Caution in
servicing
Electrical Mechanical Repair Information Updating

Table of Contents

Other manuals for Denon AVR-X3300W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3300W and is the answer not in the manual?

Denon AVR-X3300W Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Pre-out channels7.2
Pre-out connectivityYes
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.05 %
Power output per channel (1KHz@6 Ohm)180 W
Power output per channel (20-20KHz@8 Ohm)105 W
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)600 W
Product colorBlack
Audio decodersDTS-HD, DTS-HD Master Audio, Dolby TrueHD
Multi-Zone quantity2
Apple docking compatibility-
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
HDMI in8
Audio (L/R) in5
Remote control in1
Composite video in3
Composite video out0
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Audio formats supportedAAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA
Weight and Dimensions IconWeight and Dimensions
Depth389 mm
Width434 mm
Height167 mm
Weight10800 g

Related product manuals