Barcode Handy Terminal
[1] Downloading the system message file
1. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
DOWNLOAD] and then press the ENT key.
The screen displays as shown on the right indicating that the BHT is waiting
for the system message file to be downloaded.
2. While the download is in progress, the screen displays as shown on
the right indicating the file name and the number of received
records/the total number of records.
Press the BS/C key to abort the download and return to the SYSTEM
MESSAGE menu.
3. Upon completion of downloading, the BHT displays the screen shown
on the right and the speaker beeps once.
Press the BS/C key to return to the SYSTEM PARAMETER menu.
The speaker sounds three times if an error occurs during downloading, and
an error screen displays.
Refer to “Chapter 7 Error Messages” - “7.2 System Mode Errors” and
remedy the error.
- Point -
When downloading the system message file, the BHT creates
a temporary file named “_B80MSG.FN3” in the user area. An
error will therefore occur if there is insufficient space in the
user area to create the temporary file.
The created temporary file will automatically be deleted afte
downloading is complete.
127
To Next Page
Loading...
