Denso BHT-805B - Page 85


BHT-805B
Use the following procedure if necessary to change the communication environment settings.
1. Select “5: COMMUNICATION” at the SET SYSTEM menu and then
press the ENT key.
The SET COMMUNICATION menu screen on the right displays.
2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to
highlight the item to be set and press the ENT key.
“1: OPTICAL”:
Changes the IrDA communication parameters.
“2: PROTOCOL TYPE”:
Changes the communication protocol setting.
Refer to the following section for details of the above items.
Press the BS/C key to return to the SYSTEM MENU.
 “1: OPTICAL”: IrDA communication parameters
1. Select “1: OPTICAL” at the SET COMMUNICATION menu and then
press the ENT key.
The SET OPTICAL menu screen on the right displays.
2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to
highlight ”1: PARAMETER” or ”2: PROTOCOL”, and then press the
ENT key.
Press the BS/C key to return to the SET SYSTEM menu.
“1: PARAMETER”: Setting the communication parameters
Select “1: PARAMETER” to display the screen shown on the right.
The highlighted setting will be the current setting.
“1: TRANSMIT SPEED”: Setting the transmission speed
To change the setting, highlight the transmission speed with the cursor
keys ([◄] [►]) and press the ENT key.
Press the BS/C key to return to the OPTICAL menu.
72