EN Installation
03/2020 27 / 84
Tap this icon.
Go to the box Linked to and select Ethernet 1.
Enter the parameters of the embedded access point in page 1 and 2.
Tap this icon to validate.
Blue LEDs will be blinking during the change of configuration. They will then remain steady to indicate that the
embedded WI-FI access point is working properly.
How to ping an IP address
This function is used to check the network connection with any device connected to the network.
Go to the start screen and tap this icon.
Tap System > Ping.
Tap the box to enter the IP address.
Tap this icon to start.
Pairing tools via RFID
EABS
EABC
To Next Page
Loading...
Need help?
General
