EN Product Information
03/2020 9 / 84
Weight
Model kg lb
CONNECT-X 2.1 4.63
CONNECT-W 2.1 4.63
Storage and use conditions
Storage temperature -20 to +70 °C (-4 to +158 F)
Operating temperature 0 to 45 °C (32 to 113 F)
Storage humidity 0-95 % RH (non-condensing)
Operating humidity 0-90 % RH (non-condensing)
Altitude up to 2000 m (6562 feet)
Usable in Pollution degree 2 environment
Indoor use only
Wireless Communication specifications
Dual Band – 5.x and 2.4 GHz, MIMO, IEEE802.11ac indoor transceiver.
Radio Configuration 3x3 MIMO, Dual Band
Center Frequency Range • 5.180 GHz ~ 5.825 GHz
• 2.412 GHz ~ 2.484 GHz
This varies by the regulatory domain
Channel Bandwidth* 20, 40 and 80 MHz channels
Radio Modulation/Data
Rates (Dynamic Link Adaptation)
• 802.11ac: MCS0-9 (5.x GHz)
• 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps (5.x GHz)
• 802.11n: MCS0-23 (5.x and 2.4 GHz)
• 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54
Mbps (2.4 GHz)
802.11ac Wave 1 Capabilities • 802.11 dynamic frequency selection (DFS) as an AP and
Client
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx),
Maximal ratio combining (MRC), Cyclic shift diversity
(CSD), Frame aggregation, block ACK, 802.11e compatible
bursting, Spatial multiplexing, cyclic-delay diversity (CDD),
low-density parity check (LDPC), Space Time Block Code
(STBC)
• Phy data rates up to 1.3 Gbps (80 MHz channel)
802.11n version 2.0 Capabilities • 802.11 dynamic frequency selection (DFS) as an AP and
Client
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx),
Maximal ratio combining (MRC), Cyclic shift diversity
(CSD), Frame aggregation, block ACK, 802.11e compatible
bursting, Spatial multiplexing, cyclic-delay diversity (CDD),
low-density parity check (LDPC), Space Time Block Code
(STBC)
• Phy data rates up to 450 Mbps (40 MHz channel)
Accessories
Optional accessories
Use one of the following cables to connect CONNECT to the AC power supply.
Area
Length
m
Length
ft. Part number
USA 2.5 8.20 6159177410
Europe 2.5 8.20 6159177390