Operation EN
44 / 84 03/2020
When the Assembly Process is done, the tool is locked again waiting for the next one.
Click this icon to see the reason why the tool is locked.
Sending results to CVINET WEB database
Go to the start screen and tap this icon.
Tap System > Peripherals > CVINET.
Tick the box "CVINet activated".
Tap this icon.
Description Parameters Factory settings
Identifiers of the server or computer
where CVINET WEB database is in-
stalled.
IP address
Port
192.168.1.1
10002
FIFO settings Block if FIFO is full
FIFO size
Result alarm threshold
Enabled
10000
50%
To Next Page
Loading...
Need help?
General
