Service EN
60 / 84 03/2020
How to manage UV counters
Launch CVI CONFIG.
Check that CONNECT is connected to the computer.
Go to the tree view and create the product CONNECT.
Click Feature management.
Go to the box UV counters.
Note that the serial number and the firmware version of the RIM plugged to CONNECT are displayed on the right
side.
Available UVs
Prerequisite: you have already filled in the RIM with the number of UVs necessary for your planned configura-
tion.
Click this icon to update CVI CONFIG.
Go to the tree view.
Select CONNECT.
Add 4 tightening units and Pset 11 in Tightening unit - 51.
Click Feature management.
Click this icon to update the product.
Go to the box UV counters.
Note that 188 UVs are available.
Activate Tightening unit - 51 and the feature Up to 50 Psets.
To Next Page
Loading...
Need help?
General
