0065-0647-OM Rev E 7550 OWNER’S MANUAL
SCALE SETUP, CONT.
To Enter Setup, Cont.
SETTINGS OVERVIEW 2 <<<
Wi-Fi/BLE Module Rev: 1.0.01
Bluetooth: On
BLE Adv: Icon Scale F8:F0:05:D8:9D:DD
Wi-Fi: On, Status: Disconnected
Network SSID: Dynex617
DHCP: On
IP: 192.168.0.133
Mask: 255.255.255.0
Gate: 192.168.0.1
Sonar
Exit Setup
Press <<< on the touchscreen to return to the Settings Overview 1 screen.
Press Exit to exit Setup and return to the Weight screen.
Press Setup to advance to the Password screen and proceed with scale setup.
5. After pressing Setup on the touchscreen, the display will change to show
the ENTER PASSCODE screen.
ENTER PASSCODE
Enter passcode to
access settings.
Press CANCEL to
exit.
1 2 3
4 5 6
7 8 9
SAVE CANCEL
0 .
DEL
6. Using the 10-key on the touchscreen, enter 64870 and then press Save.
7. The scale is now ready for setup and calibration
This value will
not be shown if
Bluetooth: = Off
These values will not be
shown if Wi-Fi = Off.
To Next Page
Loading...
Need help?
General
