0065-0647-OM Rev E 7550 OWNER’S MANUAL
OPERATION
Basic Weighing Operation
1. With the weighing platform in the closed (stored) position, grasp the top edge of the platform
and pull it down into the operating position.
2. With the weighing platform in the operating position,
press the key to turn the scale on.
3. When the indicator reads Zero, place the empty wheelchair on the weighing platform and
press the 0 key to zero off the weight of the wheelchair.
4. Position the patient on the weighing platform by pulling the wheelchair onto the platform.
NEVER PUSH a patient in a wheelchair onto the weighing platform. ALWAYS lock the
wheelchair wheels while weighing the patient.
WARNING! Always PULL the wheelchair on and off the platform. Serious injury
to the patient could occur when pushing a wheelchair on and off the platform.
ALWAYS lock the wheelchair wheels when weighing the patient, and NEVER
leave the patient unattended while on the scale platform. Failure to maintain
control of the patient and/or wheelchair at all times can result in serious injury
to the patient and/or you.
Never Push
Wheelchair
onto Scale
Pull
Wheelchair
onto Scale
To Next Page
Loading...
Need help?
General
