Detecto 7550 User Manual

0065-0647-OM Rev E 7550 OWNER’S MANUAL
61
DISPLAY SCALE WI-FI AND BLUETOOTH SETTINGS
To View the Settings:
1. Press the key to turn the scale on.
2. The scale will show the Detecto logo briefly and then change to the Weight screen.
3. With the Weight screen displayed, press the Menu key.
4. The display will change to show the Settings Overview 1 screen.
SETTINGS OVERVIEW 1 >>>
Revision 1.00.11, Display Rev. 1.0.21
Audit Trail -- Cal=4, Cfg=2
Range 1: 1000.0 x 0.2
Weight Units=lb Height Units=in
Auto Lock=0 s Sonar Ht=0.0 cm
Motion=3 div. Filter=Off
OIML=No ZeroTrack=10/2 d
USB: SMA Gravity=0.000000
Power up zero=No
Sonar Exit Setup
5. Press >>> on the touchscreen to advance to the Settings Overview 2 screen.
SETTINGS OVERVIEW 2 <<<
Wi-Fi/BLE Module Rev: 1.0.01
Bluetooth: On
BLE Adv: Icon Scale F8:F0:05:D8:9D:DD
Wi-Fi: On, Status: Disconnected
Network SSID: Dynex617
DHCP: On
IP: 192.168.0.133
Mask: 255.255.255.0
Gate: 192.168.0.1
Sonar Exit Setup
6. Press Exit to exit the Settings Overview screen and return to the Weight screen.
This value will
not be shown if
Bluetooth: = Off
.
These values wi
ll not be
shown if Wi-Fi = Off.

Detecto 7550 Specifications

General

Brand	Detecto
Model	7550
Category	Scales
Language	English