Deutz 2012 - Page 48

Service and Maintenance
6.1 Lubrication System
Schmierol-QualiUit
I 6.1.1.2 Oil change intervals for vehicle engines
Deutz lube oil quality class
DQCI
DQC II
DQC III
ACEA specification
E2-96
E3-96/E5-02
E4-99
API s ecification
CF/CF-4 CG-4/CH-4
Euro II and Euro III exce t for:
40000
30000
40000
40000
30000
30000
40000
30000
20000
20000
20000
20000
30000
30000
20000
15000
Enclosure 1
DHD-1
Lube
oil change intervals in km
20000
m
>
143 kW from Euro II at cylinder
bore 101 mm with or 98 mm with MV s stem
>
135 kW from Euro II at cylinder
r mm wi h m h ni I in' i n
>
95 kW from Euro II
> 135 kW from Euro II at cylinder bore 98 mm
with mechanical in"ection s stem
Euro I
Euro II and Euro III exce t for:
> 135 kW from Euro II at cylinder
bore 98 mm with mechanical in"ection s stem
>
95 kW from Euro II
> 143 kW from Euro II at cylinder
bore
101 mm with or 98 mm with MV s stem
> 143 kW from Euro II at cylinder
bore
101 mm with or 98 mm with MV s stem
e ial DEUTZ relea e
2012 __ E ....... uLL...:!ro~I _
Euro II and Euro III exce t for:
Engine version
worldwide specification
Long
distance
traffic
Application
Local
traffic
Site
vehicles/
busses
If, for vehicle engines, lube oil change intervals are determined by operating hours, the lube oil change intervals indicated in table 4.1. for "Oil
use under normal duty" will apply.
~
o
o
N
©