6.1
Lubrication System
6.1.4 Clean I Replace
Oil
Filter
(Cup)
• Switch off the engine.
• Loosen lube oil filter cover 1 and unscrew
in an anticlockwise direction, emties itself
the system automatically (drain valve).
• Carefully loosen paper filter cartridge 3
upwards from the guide 4.
• Catch any escaping oil.
• Replace paper filter cartridge
3.
• Clean any dirt from the sealing surface
of
the filter carrier and lube oil filter cover 1
and fromb the guide 4.
&..
•••...•.•.••....................•......•..•...•....................•........•....•...............
Caution is required
in
the case
'
of
hot oil:
.......
Risk
of
scalding!
•
Service and Maintenance
• Replace and lightly oil the rubber gasket
2.
• Carefully insert new paper filter cartridge 3
into guide 4.
• Tighten lube oil filter cover 1
in
a clockwise
direction (25 Nm).
• Start engine.
• Check oil level, see 6.1.2.
• Check oil pressure, see 3.3.1.
• Check lube oil filter attachment for leaks.
..q
o
o
N
©
To Next Page
Loading...
