Dexcom Share - Replacing Receiver

66 Using the Dexcom Share2 App
Step Instruction
Step 4 Select “OK” to forget previous smart device. This action will
turn Share “Off.”
Step 5 Turn Share back “On.” This action readies the receiver with
Share for pairing to a new device.
Step 6 Finish pairing your receiver with your new smart device by
opening up the Dexcom Share2 app on your new device
and pressing the Pair Receiver button in the Account tab.
Replacing Receiver
If it becomes necessary to replace your receiver with
Share, follow these directions after receiving the new
receiver with Share:
Step Instruction
Step 1 Go into the Bluetooth settings on the Sharer’s smart device.
Step 2 Select the device named DEXCOMRX.
Step 3 Press “Forget this Device” to remove the original receiver
from the list of Bluetooth devices.