Dexion HI280 - Page 4

Issue: June 2005 Section - Contents Page 2
Section E – Frame Assembly Schedule Page
Introduction...........................................................................................................................
E.1
Low Rise - Fixed Height Frames up to 3000mm
2 L/D Battens (swaged or riveted) .......... 300 to 600mm widths...........................................
E.3
2 H/D Battens (riveted) ........................... 800, and 1000mm widths.....................................E.4
3 L/D Battens (swaged or riveted) .......... 300 to 600mm widths...........................................E.5
3 H/D Battens (riveted) ........................... 800, and 1000mm widths.....................................E.6
4 L/D Battens (swaged or riveted) .......... 300 to 600mm widths...........................................E.7
4 H/D Battens (riveted) ........................... 800, and 1000mm widths.....................................E.8
4 L/D Battens (swaged) + 2 ‘X’ braces ... 300 to 600mm widths........................................... E.9
4 L/D Battens (riveted) + 2 ‘X’ braces..... 300 to 600mm widths.........................................E.10
3 H/D Battens (riveted) + 2 ‘X’ braces ....800, and 1000mm widths................................... E.11
High Rise - Variable Height Frames from 3100 to 5500mm
4 L/D Battens (swaged or riveted) .......... 300 to 600mm widths...................................
E.12, 13
4 H/D Battens (riveted) ........................... 800, and 1000mm widths.............................E.14, 15
5 L/D Battens (swaged or riveted) .......... 300 to 600mm widths...................................E.16, 17
5 H/D Battens (riveted) ........................... 800, and 1000mm widths.............................E.18, 19
4 H/D Battens (riveted) + 2 ‘X’ braces ....800, and 1000mm widths................................... E.20
5 L/D Battens (swaged) + 2 ‘X’ braces ... 300 to 600mm widths................................... E.21, 22
5 L/D Battens (riveted) + 2 ‘X’ braces..... 300 to 600mm widths...................................E.23, 24
5 H/D Battens (riveted) + 2 ‘X’ braces ....800, and 1000mm widths............................. E.25, 26
High Rise - Variable Height Frames from 3100 to 12,000mm
Fully braced with L/D battens (swaged).. 300 to 600mm widths.............................
E.27, 28, 29
Fully braced with L/D battens (riveted) ... 300 to 600mm widths.............................E.30, 31, 32
Fully braced with H/D battens (riveted)... 800, and 1000mm widths....................... E.33, 34, 35
Solid Clad Frames - Variable Height Frames to 12,000mm ........................E.36, 37, 38, 39
Multi-Tier Frames Fixed Height up to 3000mm
2300mm Multi-Tier (Braced + L/D swaged battens) ..... 300 to 600mm widths..................
E.40
2300mm Multi-Tier (Braced + L/D riveted battens)........ 300 to 600mm widths.................. E.41
2300mm Multi-Tier (Braced + H/D riveted battens) ....... 800 and 1000mm widths............. E.42
2500mm Multi-Tier (Braced + L/D swaged battens) ...... 300 to 600mm widths..................
E.43
2500mm Multi-Tier (Braced + L/D riveted battens)........ 300 to 600mm widths.................. E.44
2500mm Multi-Tier (Braced + H/D riveted battens) ....... 800 and 1000mm widths............. E.45
3000mm Multi-Tier (Braced + L/D swaged battens) ...... 300 to 600mm widths..................
E.46
3000mm Multi-Tier (Braced + L/D riveted battens)........ 300 to 600mm widths.................. E.47
3000mm Multi-Tier (Braced + H/D riveted battens) ....... 800 and 1000mm widths............. E.48
Section F – Full Width Back Cladding Schedule Page
Introduction...........................................................................................................................
F.1