SECTION A – PRODUCT INTRODUCTION
BASIC SYSTEM
The Dexion HI280 shelving system is a heavy duty, versatile product available in a wide choice of
sizes to enable individual solutions to be tailored to client requirements. It is quick and easy to
assemble with the main components simply hooking and locking together to provide a strong rigid
structure.
With a full range of accessories, choice of upright styles, and flexibility to increase shelf capacities,
the system is ideal for providing storage solutions ranging from simple low rise shelving accessed
by pedestrian operatives through to high rise installations requiring access via raised walkways or
mechanical order picking equipment.
It is possible to enclose individual storage compartments with side and/or back cladding, and to
enclose the front with lockable door sets. Small items can be accommodated in a range of bins,
drawers and tray sets.
It is principally a ‘bolt-free’ system with frame components either being swaged or riveted together,
and shelf beam components hooking and locking together. However when the system is extended
to provide either taller or heavier loaded structures the addition of such items as bracing or special
baseplates will require the use of some nuts and bolts.
Notation
Where ever possible within this manual we have tried to keep to the following notation when
describing the shelving components:
‘L’ Length, such as bay length, beam and shelf lengths etc.
‘W’ Width, such as frame width, shelf width etc.
‘H’ Height, such as frame height etc.
‘T’ Thickness, such as shelf thickness, material thickness etc.
Issue: June 2005 Section A – Product Introduction Page A.1
To Next Page
Loading...