SM-200 TE Grinding and Honing Machine 11
Safety
5
5. Safety
5.1 Meaning of the warnings
In these operating instructions, a differentiation is made between
warnings depending on the hazard:
5.2 Intended use
DANGER
Imminent risk to the life and health of people.
• Causes serious injuries or death.
WARNING
Possible imminent risk to the life and health of people.
• Could cause serious injuries or death.
CAUTION
Possible dangerous situation
• Could cause minor injuries.
The SM-200 TE grinding and honing machine is designed exclusi-
vely for commercial use.
The SM-200 TE grinding and honing machine may exclusively be
used for grinding and honing hand knives, cleavers, cutting tools,
cutter knives, circular blades and machine knives with a smooth
cutting edge. The grinding arm that is mounted determines the cut-
ting type of machine knife that can be ground:
• Linear cutting edge only with a universal grinding arm
• Radial cutting edge with a universal and radial grinding arm
• Spiral-shaped cutting edge conditionally with a universal and
radial grinding arm.
A special grinding arm (accessory) allows the sharpening of small
circular blades. A guard (accessory) must be mounted for sharpe-
ning large circular blades (Ø 200-500 mm).
To Next Page