Digi SM-100 Service Manual

SM 100 SOFTWARE SETTING
23
C. Download boot program and update the scale
Select menu “F
ile->Load File To Programmer Buffer”
Open the source file of boot program (e.g. sm100bv100.hex)
You can see a speed mode select window here.
Select menu “F
lash->Program”
Notice: The message “001 scale ready update” must be displayed on the
screen of the scale before pressing the “run” button.
All manuals and user guides at all-guides.com

Digi SM-100 Specifications

General

Capacity	15 kg
Weighing Units	kg, g
Display	LCD
Auto Power Off	Yes
Overload Protection	Yes
Interface	RS-232
Power Source	Rechargeable battery