Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
11
ATFS GETfilename 198
ATFS MVsource_pathdest_path 198
ATFS RMfile_or_directory 198
ATFS INFO 198
ATFSFORMAT confirm 199
BLE commands 200
BL (Bluetooth MAC address) 200
BT (Bluetooth enable) 200
$S (SRPSalt) 200
$V, $W, $X, $Y (SRPpassword verifier) 201
Remote Manager commands 202
DF (Remote Manager Status Check Interval) 202
EQ (Remote Manager FQDN) 202
K1 (Remote Manager Server Send Keepalive) 202
K2 (Remote Manager Device Send Keepalive) 202
MO (Remote Manager Options) 203
$D (Remote Manager certificate) 203
RI (Remote Manager Service ID) 203
DP (Remote Manager Phone Number) 204
HF (Health Metrics Reporting Frequency) 204
HM (Health Metrics) 204
System commands 205
KL (Device Location) 205
KP (Device Description) 205
KC (Contact Information) 205
Operate in API mode
API mode overview 207
Use the AP command to set the operation mode 207
API frame format 207
API operation (AP parameter = 1) 207
API operation with escaped characters (AP parameter = 2) 208
API frames
AT Command - 0x08 212
AT Command: Queue Parameter Value - 0x09 213
Transmit (TX) SMS - 0x1F 214
Transmit (TX) Request: IPv4 - 0x20 215
Tx Request with TLS Profile - 0x23 217
AT Command Response - 0x88 219
Transmit (TX) Status - 0x89 220
Modem Status - 0x8A 222
Receive (RX) Packet: SMS - 0x9F 223
Receive (RX) Packet: IPv4 - 0xB0 224
User Data Relay - 0x2D 225
Example use cases 225
User Data Relay Output - 0xAD 227
BLE Unlock API - 0x2C 228
Example sequence to perform AT Command XBee API frames over BLE 230
BLEUnlock Response - 0xAC 232
To Next Page
Loading...
Need help?
General
