D-Control Guide78
Dynamics Section
The Dynamics section includes standard controls for compressor, gate, and limiter plug-ins, an array of controls for managing the
display and editing of plug-in parameters, and selecting or linking channels in multi-mono plug-ins.
Dynamics Plug-in Support
Dynamics processing plug-ins may have widely varying con-
trols, depending on their applications. The D-Control Dynam-
ics Section provides dedicated knobs and switches to accom-
modate the widest range of plug-ins possible. Not all plug-ins
will require all the Dynamics controls, while others may have
more parameters than can be displayed in the Dynamics sec-
tion at one time. To display all controls in any plug-in, you
can use Custom Fader Plug-ins mode.
Displaying Dynamics Plug-ins
The D-Control Dynamics section automatically focuses the
first dynamics plug-in on the channel displayed in the Focus
Channel Strip on the Main Unit.
To display successive dynamics plug-ins that are on the fo-
cused channel, press the Cycle switch in the Dynamics sec-
tion.
D-Control Dynamics section
Knee/Hysteresis Attack Gain/Hold
Ratio/Range Release Threshold Gain Reduction
meters
Input and Output
meters
Low Filter High Filter
Level controls
Channel Select
switches
Dynamics Edit and Display controls
controlscontrolscontrols
control
controlcontrols
controls control
To Next Page
Loading...
Need help?
General
