Chapter 3: Setting Up D-Control 15
Chapter 3: Setting Up D-Control
This chapter explains how to set up 16-fader (Main Unit plus one Fader Module) and 32-fader D-Control systems (Main Unit plus
two Fader Modules).
D-Control Stand
(16-Fader and 32-Fader Systems)
The stand configurations for 16-fader and 32-fader systems have similar assembly procedures and the same number of parts (the
crossbar and support rails are longer for a 32-fader system).
Figure 1. Assembled D-Control stand
To Next Page
Loading...
