Chapter 11: Normal Mode Operations and Commands 129
Viewing Assignments
Display of I/O Assignments
You can view the I/O assignments for individual channels in a
momentary I/O view. I/O assignments are displayed at the of
bottom the channel’s encoders, according to track type. As-
signments are displayed from top to bottom as follows:
• Audio and Auxiliary Input tracks
•Input
•Output
• Instrument tracks
•MIDI input
•MIDI output
•Aux input
• Aux output
•MIDI tracks
•MIDI input
•MIDI output
• Master Fader tracks
•Output
•VCA Master tracks
• Group assignment
To view the I/O assignments on a track:
Press and hold the Sends switch on the track. The Sends
switch lights to indicate I/O view.
Display of Multiple Output Assignments
Audio and MIDI Tracks
For audio or MIDI tracks that have multiple output assign-
ments, a Plus (+) sign precedes the output name.
To view the names of multiple output assignments:
1 Press and hold the Sends switch on a track with multiple
output assignments. The Sends switch lights to indicate I/O
view.
2 Press the B/M/P switch under any output name preceded by
a plus (+) sign. The names of output paths “spill” onto the
track’s encoder displays.
3 To exit output “spill” view, press any of the lit output path
B/M/P switches.
To rename an I/O path on an audio track:
1 Press and hold the Sends switch on the track. The Sends
switch lights to indicate display of I/O assignments.
2 If you have multiple I/O assignments on the track, press the
B/M/P switch under any output name preceded by a plus (+)
sign. The names of output paths “spill” onto the track’s en-
coder displays.
3 Hold Start (Windows) or Control (Mac) and press the B/M/P
switch under the I/O path you want to rename.
4 Enter a new name for the path.
5 Click OK.
Display of Multiple Send Assignments
For sends that have multiple assignments, a Plus (+) sign pre-
cedes the send name.
To view the names of multiple send assignments:
1 Press the Sends switch on a track with multiple send assign-
ments.
2 Hold Control (Windows) or Command (Mac) and press the
B/M/P switch under any Send name preceded by a plus (+)
sign. The names of send paths “spill” onto the track’s encoder
displays.
3 To exit send “spill” view, press any of the lit send path B/M/P
switches.
To rename a Send path:
1 Press the Sends switch on the track with the Send you want
to rename.
2 If you have multiple sends on the track, hold Control (Win-
dows) or Command (Mac) and press the B/M/P switch under
any Send name preceded by a plus (+) sign,. The names of send
paths “spill” onto the track’s encoder displays.
3 Hold Start (Windows) or Control (Mac) and press the B/M/P
switch under the send path name.
4 Enter a new name for the path.
5 Click OK.
To Next Page
Loading...
Need help?
General
