Chapter 5: Mbox 2 Mini Hardware Overview 51
Pad Switch
The Pad switch engages a –20 dB pad on the input channel 2. When pressed in, the Pad is en-
abled.
Mon Out (Monitor Output)
To monitor your mix, these outputs can be connected to a mixing board, directly to a moni-
toring system such as a stereo power amp, or another stereo destination.
These outputs accept TRS (Tip-Ring-Sleeve) or TS (Tip-Sleeve) 1/4-inch connections.
The Mon Out L and R outputs play the audio that is routed to analog outputs 1 and 2 from
within Pro Tools, respectively. These analog outputs feature 24-bit digital-to-analog convert-
ers.
USB Port
This standard USB v1.1 connector is used to connect your computer to the Mbox 2 Mini. One
standard USB cable is included with your system.
The Mbox 2 Mini is compatible with USB 2.0 ports. However, the USB 2.0 bus will switch to
the slower USB v.1.1 speed to accommodate Mbox 2 Mini.
Kensington Lock Port
Use the Kensington Lock port to secure your Mbox 2 Mini with a Kensington Lock (not sup-
plied).
For more information, visit the Kensington website (www.kensington.com).
To Next Page
Loading...
