Digisol DG-BG4100NU - Page 89

DG-BG4100NU User Manual
89
Tunnel
Choose Tunnel in the left pane, and the page shown in the f ollowing figure appears. You
may conf igure tunnels to connect to ipv 4 and ipv6 networks.
The following table describes the parameters and button of this page.
Field
Description
v6inv4 Tunnel
Interf ace
Select the tunnel interf ace name; user can set 2 v6inv 4 tunnel.
Mode: 6to4 Tunnel
Enable or disable special tunnel.
DS-Lite Tunnel
Enable
Enable or disable the DS-Lite tunnel.
Interf ace
Select current wan interf ace used as tunnel interface.
Mode: Auto/Manual
Select Auto or Manual.