Digisol DG-BG4300NU - Nat Forwarding

DG-BG4300NU User Manual
105
4.6.2.3 NAT Forwarding
Click NAT Forwarding in the left pane, the page shown in the following figure appears.
Under 1483MER or 1483Routed mode, if NAPT (Network Address Port Translation) is
enabled, the Local IP Address is configured as 192.168.1.3 and the Remote IP Address is
configured as 202.32.0.2, the PC with the LAN IP 192.168.1.3 will use 202.32.0.2 when it is
connected to the Internet via the router without NAPT control.
The following table describes the parameters and buttons of this page:
Field Description
Local IP Address
Input a local IP address.
Remote IP
Address
Input a remote IP address
Enable Enable the current configured rule.
Apply Changes Submit the configurations.
Reset Cancel the modification and reconfigure the settings.
Current NAT Port
Forwarding Table
Current configuration rule list.