DG-BG4300NU User
Manual
106
4.6.2.4 ALG
Click ALG in the left pane, and the page shown in the following figure appears. Choose the
NAT ALG and Pass-Through options, and then click Apply Changes.
4.6.2.5 NAT Exclude IP
Click NAT Exclude IP in the left pane, and the page shown in the following figure appears.
In the page, you can configure some source IP addresses which use the purge route mode
when accessing internet through the specified interface.
Field Description
IP range
Enter the IP address range, which do not require NAT
translation entries to be permitted by the router.
To Next Page
Loading...
Need help?
General
