DG-BG4300NU User
Manual
116
4.6.7 Others
Choose Advance > Others, and the page shown in the following figure appears. The page
that is displayed contains Bridge Setting, Client Limit, Tunnel and Others.
4.6.7.1 Bridge Setting
Choose Advance > Bridge Setting, and the page shown in the following figure appears.
This page is used to configure the bridge parameters. You can change the settings or view
some information on the bridge and its attached ports.
The following table describes the parameters and button of this page:
Field Description
Ageing Time If the host is idle for 300 seconds (default value), its entry is
deleted from the bridge table.
802.1d Spanning
Tree
You can select Disable or Enable.
Select Enable to provide path redundancy while preventing
undesirable loops in your network.
Show MACs Click it to show a list of the learned MAC addresses for the
bridge.
To Next Page
Loading...
Need help?
General
