DG-BG4300NU User
Manual
120
4.7 Admin
In the navigation bar, click Admin. The Admin page that is displayed contains
Commit/Reboot, Update, Log, Password and Time.
4.7.1 Commit/Reboot
Choose Admin > Commit/Reboot, and the page shown in the following figure appears. You
can set the router reset to the default settings or set the router to commit the current settings.
The following table describes the parameters and buttons on this page:
Field Description
Reboot from
You can choose Save current configuration or Factory default
configuration.
•
Save current configuration: Save the current settings, and
then reboot the router.
•
Factory default configuration: Reset to the factory default
settings and reboot the router.
Commit
Changes
Click it to apply the changes
Reset Click it to undo the selection.
Reboot Click it to reboot the router.
To Next Page
Loading...
Need help?
General
