DG-BG4300NU User
Manual
98
4.6 Advanced
In the navigation bar, click Advanced. In the Advanced page that is displayed contains Bridge
setting Routing, NAT, Port Mapping, IP QoS, SNMP and Others.
4.6.1 Routing
Choose Advance > Routing, and the page shown in the following figure appears. The page
that is displayed contains Static Route, IPv6 Static Route and RIP.
4.6.1.1 Static Route
Click Static Route in the left pane, and the page shown in the following figure appears. This
page is used to configure the routing information. You can add or delete IP routes.
The following table describes the parameters and buttons of this page:
Field Description
Enable Select it to use static IP routes.
Destination Enter the IP address of the destination device.
Subnet Mask Enter the subnet mask of the destination device.
To Next Page
Loading...
Need help?
General
