DG-BG4300NU User
Manual
99
Next Hop Enter the IP address of the next hop in the IP route to the
destination device.
Metric The metric cost for the destination.
Interface The interface for the specified route.
Add Route Click it to add the new static route to the Static Route Table.
Update Select a row in the Static Route Table and modify the parameters.
Then click it to save the settings temporarily.
Delete Selected Select a row in the Static Route Table and click it to delete the row.
Show Routes Click it, the IP Route Table appears. You can view a list of
destination routes commonly accessed by your network.
Static Route
Table
A list of the previously configured static IP routes.
Click Show Routes, the page shown in the following figure appears. The table shows a list of
destination routes commonly accessed by your network.
To Next Page
Loading...
Need help?
General
