DG-BG4300NU User
Manual
100
4.6.1.2 IPv6 Static Route
Click IPv6 Static Route in the left pane, and the page shown in the following figure appears.
This page is used to configure the routing information. You can add or delete IP routes.
The following table describes the parameters and buttons of this page.
Field Description
Destination Enter the IPv6 address of the destination device.
Prefix Length Enter the prefix length of the IPv6 address.
Next Hop Enter the IP address of the next hop in the IPv6 route to the
destination address.
Interface The interface for the specified route.
Add Route Click it to add the new static route to the IPv6 Static Route Table.
Delete
Selected
Select a row in the IPv6 Static Route Table and click it to delete
the row.
To Next Page
Loading...
Need help?
General
