Digisol DG-PS1010U - TCP;IP Wizard; TCP;IP Configuration Steps

To Next Page

To Previous Page

DG-PS1010U User Manual

TCP/IP Wizard

1. Click Wizard button ＜

＞and select TCP/IP Wizard.

Fig 14

2 Select “Obtain an IP address from DHCP server”. If there is a DHCP server in your

network. This option allows the print server to obtain IP-related settings automatically from

your DHCP server. This setting by default, is disabled. If you would like to manually specify

an IP address to the device, please skip to the following step.

3 In the IP Address option, type an IP address for the print server. The IP address must

meet the IP addressing requirements of the network segment.

Fig 15