Digisol DG-PS1010U - Netware Setup

DG-PS1010U User Manual
41
NetWare Setup
1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent.
2. Select NetWare and type in the Print server that created during PCONSOLE Select the
NetWare File Server to which the print server device will be attached.
3. Click Setup, it then appears the sub-menu.
4. Click NetWare, it then as shown in the following picture.
Fig 34
Print Server Name:
This option allows you to input print server name which configured by PSAdmin
utility or PCONSOLE program.
Polling Time:
The time interval in which the print server unit polls the file server for servicing of
print queues.
Logon Password:
This option allows you to input encrypted password from the print server. The print
server login to NetWare server that administrator set password from selected print
server.