Need help?Do you have a question about the Digisol DG-PS1010U and is the answer not in the manual?
General| Device Type | Print Server |
|---|---|
| Model | DG-PS1010U |
| Interface | USB 2.0 |
| Network Interface | 10/100 Mbps Ethernet |
| Network Protocol | TCP/IP |
| Supported OS | Windows, Mac OS, Linux |
| Management | Web-based management |
| Ports | 1 x USB 2.0 |
| Protocols | LPR, IPP |
| Compatibility | Most USB printers |
| Power Supply | 5V DC |
Provides a general description of the DG-PS1010U USB 2.0 print server.
Lists the supported network protocols, operating systems, and hardware features.
Guides users through the installation of the print server's software and drivers.
Introduces the PSAdmin utility for configuring and managing the print server.
Details the process of configuring TCP/IP settings for the print server.
Explains how to access and use the print server's embedded web interface for configuration.
Allows users to view the current TCP/IP configuration of the print server.
Guides users through configuring IP address, subnet mask, and default router settings.
Step-by-step guide for installing the TCP/IP protocol for network printing.
Describes methods for assigning an IP address to the print server.
Instructions for upgrading the print server firmware using the PSAdmin utility.
Steps to upgrade the print server's firmware via its web interface.
Covers common problems and general troubleshooting steps for the print server.
Instructions for resetting the print server to its factory default settings.
To Next Page