DG-PS1010U User Manual
42
Use NDS Mode:
To Enable NDS Mode, if you want to setup NDS environment. To select Tree
Name of NetWare then input context name in the Context box.
Bindery Mode:
To Enable Bindery Mode, if you want to setup Bindery environment. To select File
Server Name of NetWare.
Installing Print Server on NetWare 4.x/5.x
Due to its architecture and functionality, the print server must work under NetWare 4.x/5.x NDS
Bindery Emulation. When you install the NetWare file server for the first time, by default, the
installation program will automatically set up the Bindery Emulation function for you by adding
“SET BINDERY CONTEXT =” in the AUTOEXEC.NCF file. By default, the bindery context will
only be set on your organization (O) object.
If you have ever modified this line, or if you have ever added any organization units (OU) to your
NDS tree after the NetWare system was installed, please read the following section before you
install the print server.
For the purpose of illustration, we assume the NDS tress structure is as follows:
[ROOT]
(O)ABC
(OU)ABC-USA (OU)Sales
Admin
FileServer-1 (OU) Tech
To Next Page
Loading...
Need help?
General