Digisol DG-PS1010U User Manual

DG-PS1010U User Manual
56
Windows 7/Vista/XP/2003 /2000 Standard TCP/IP Port Printing Installation
1. Click Start, point to Settings, and select Printer.
2. Run Add Printer, Click Next.
3. The Add Printer Wizard screen will appear, Select Local Printer and click Next.
4. From the type of Create a new port box as shown in the following picture, select the
Standard TCP/IP Port, Click Next and Next.
Fig 42
5. The Add Standard TCP/IP Printer Port Wizard box will then appear as shown the picture as
below, and type in the IP address assigned to the print server in the Printer Name or IP
Address box, Click Next.
Fig 43

Digisol DG-PS1010U Specifications

General

Brand	Digisol
Model	DG-PS1010U
Category	Print Server
Language	English