DG-PS1010U User Manual
22
Properties –TCP/IP Options
The TCP/IP option allows you to modify the print server’s TCP/IP settings. Each option is detailed
as follows.
Fig 18
Obtain an IP address from a DHCP server:
You can enable or disable the DHCP feature of the print server. When this option is enabled, the
print server will obtain an IP address automatically from the DHCP server on your LAN.
Note: 1. Once this option is enabled, the fields for IP address, Subnet Mask, Gateway will be
grayed out and are not available for editing.
2. While the print server supports DHCP, we strongly recommend you to manually specify a
fixed IP address to the print server.
Specify an IP address:
IP Address:
This option shows the print server’s current IP address which maybe obtained from your
DHCP server or manually specified. This option also allows you to manually specify an IP
address to the print server, if DHCP option is disabled.
Subnet Mask:
This option shows the print server’s current subnet mask which maybe obtained from the
DHCP server or manually specified. This option also allows you to manually specify a
subnet mask to the print server, if DHCP option is disabled. This value is optional.
To Next Page
Loading...
Need help?
General