DG-PS1010U User Manual
47
In the print server's SNMP implementation, the following MIB objects are available for
updating.
MIB Object Names Description
system.sysContact Indicates the network administrator's name.
system.sysName Indicates the print server's name for identification.
system.sysLocation Indicates the location of the print server.
snmp.snmpEnableAuthenTraps
Enables or disables the function of sending SNMP
Authentication Failure trap message to the network
administrator, if the community name within a SNMP request
is not correct.
Users can set up print server’s SNMP functions by using their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
Fig 36
To Next Page
Loading...
Need help?
General