Digital Bolex D16 - Shot Modes & Timelapse; Time Lapse Mode

The D16 has three SHOT MODES that allow for distinct functions:
CONTINUOUS, SINGLE FRAME, and TIME LAPSE. You can
access the SHOT MODE submenu from the MAIN MENU.
CONTINUOUS
Is the standard shooting mode for motion picture capture, shooting
at the frame rates you’ve chosen in the IMAGE menu.
SINGLE FRAME
Is intended for animation, and records one frame every time the
record button or trigger is pressed.
Time Lapse Mode
Create timelapses easily in camera without an intervalometer or
external trigger.
SHOOTING SINGLE FRAMES 35
Under the SHOT MODE menu, select TIME LAPSE to active
this mode and its SETTINGS.
INTERVAL
Set the number of time intervals you would like the camera to
wait between shots, from 1 - 60.
TIMEBASE
Set your INTERVAL to record based on SECONDS or MINUTES.
EXPOSURE
Set the speed of your exposure between 1/25th of a second to
1/500th of a second. (This will override any shutter angle you
have already set for your continuous shooting.)
SHOT MODES & TIMELAPSE
To navigate, use to scroll to select and return
MENU
TO EXIT
IMAGE
SETTING
SHOT MODE Continuous
Single Frame
Time Lapse
To navigate, use to scroll to select and return
MENU
TO EXIT
TIME BASE
EXPOSURE
INTERVAL SECOND
MINUTE
Interval time base unit.