Digital Bolex D16 - Monitor Hood

Using the pistol grip with different lens mounts
In some cases, the pistol grip may still be used even when a
lens mount other than the default C-mount is installed. See
the instruction manual of your preferred lens mount for further
information.
Rails, Follow Focus, and Matte Box
Like any cinema camera, the D16 is capable of being tted with
pro accessories for use on large productions. Standard rails,
follow focus systems, and matte boxes can be used on the D16
in multiple congurations.
Follow Focus
A follow focus for the D16 can be used on either side of the
camera.
Other accessories
Other accessories may help make the most of your camera.
Cheeseplate
The D16 cheeseplate is designed to attach to the top cold shoe
mount and provides more than thirty additional mounting points
for accessories like lights, microphones, or EVFs.
CAMERA ACCESSORIES 37
Wrist Strap
A wrist strap provides an additional safety precaution when you
choose to hand-hold your camera. A wrist strap with a tripod
screw can attach to the mount at the bottom of the pistol grip.
Monitor Hood
A monitor hood can be useful for reducing glare on the onboard
monitor when shooting in bright daylight. The D16 monitor hood
attaches via the two large screw threads above the onboard
monitor and provides shade and an angled view of what’s on
the screen. Best used with MIRROR LCD mode. (See Page 25)
Weather-sealed Skin
The D16 has a rugged outer body with few points of entry for
moisture and small particles, but for shoots on the beach or in
raining, humid, or snowy weather, your camera will be better
protected with a rubber, weather-sealed skin that ts snugly
over the ports on the left side of the camera.