DigiTech JAMMAN User Manual

21
Amp Loop
Making Connections
To Amp Input
From Amp FX Send
to Left (Mono) Input
From Left (Mono) Output
to Amp FX Return
The Amp Loop connection can be used if your amp has an effects loop.
Connect the guitar to the amp’s input. Connect the amp loop’s Send jack to
the JamMan
®
Delay’s LEFT (MONO) Input. Connect the JamMan Delay’s LEFT
(MONO)
Output to the amp loop’s Return jack.
If the amp’s effects loop is a serial effects loop (no parallel dry path) set
the DRY OFF button to OFF. If the amp’s effects loop has is a parallel loop,
(typically has a Mix control), you have two options:
Set the 1. DRY OFF button to be ON and use amp’s loop Mix control and
the JamMan Delay’s DELAY LEVEL and LOOP LEVEL knobs to balance the
effect level.
If your amp has a series effects loop the DRY OFF button should be 2.
OFF. If your amp has a parallel effects loop, the DRY OFF button should
be ON.

DigiTech JAMMAN Specifications

General

Technology	Digital
MIDI	No
Type	Looper
Memory	Internal memory for loop storage
Power Supply	9V DC
Outputs	1 x 1/4" Mono