20
5.7 Image mirroring mode
When the image has a mirror flip, you can enter the mirror flip mode by reading the
following setting codes.
Image mirror flip-on
**Image mirror flip-off
Note: In the mirror flip mode, only the barcode flipped by the mirror can be recognized. If
you need to identify the normal barcode or the setting code, please exit the mirror flip
mode first.
5.8 Reverse reading mode
In some special application scenarios, it is necessary to read special barcodes in black and
white inverted. Users can enable/disable the reading function of inverted barcodes by
reading the following setting codes.
**Reverse phase prohibition
Reverse phase allowed
5.9 Read device version information
Users can quickly obtain the current device version information by reading the following
setting codes.
Read device version information
To Next Page
Loading...
