38
Code 39 Start character output
**Code 39 start character is not output
Code 39 Terminator output
**Code 39 Terminator is not output
7.8.4 Code 32 Mode
Users can set whether Code 39 supports Code 32 mode by reading the following setting
codes.
Support Code 32 mode
**Not support Code 32 mode
The user can set whether to output the Code 32 prefix by reading the following setting
codes.
**Code 32 Prefix A output
Code 32 Prefix A not output
7.8.5 Full Asc Mode
Users can set whether Code 39 supports Full Asc mode by reading the following setting
codes.