Digitus DA-81003 - Start and End Character Output Settings; Interleaved 2 of 5 Settings; Permit and Prohibit Reading Function; Reading Length Setting

40
7.9.3 Start character and end character output settings
The user can set the start and end symbol output of CodaBar by reading the following
setting codes.
CodaBar Start and end
character output
**CodaBar Start and end
characters not output
7.10 Interleaved 2 of 5
7.10.1 Permit and prohibit the reading function
Users can enable or disable the Interleaved 2 of 5 barcode reading function by reading the
following setting codes.
Allow Interleaved 2 of 5 reading
**Prohibit Interleaved 2 of 5 reading
7.10.2 Reading length setting
Users can set the shortest and longest reading length of Interleaved 2 of 5 by reading the
following setting codes.
Interleaved 2 of 5 min length of
the message 0
**Interleaved 2 of 5 min length of
the message 4
**Interleaved 2 of 5 max length of
the message 32
Interleaved 2 of 5 max length of
the message 255